We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
A team of researchers from Brazil recently reviewed the extraction of valuable metals from electronic wastes using the chemical leaching process. This study has been published in the Journal of Environmental Chemical Engineering.
Study: Recovering metals from motherboard and memory board waste through sulfuric leaching . Image Credit: Jirik V/Shutterstock.com
Urban mining is a necessity for current and future generations to complement the consumption of natural resources by recovering materials from post-consumer products, transforming them into raw materials, and adding value to these wastes.
The recovery of metals from the wastes of electrical and electronic equipment (WEEE) can be a solution to environmental as well as economic problems that arise from managing these materials for a large population.
Printed circuit boards (PCBs) are the major components of electronic equipment; they represent 3-4% by weight of these scraps, and, in advanced consumer electronics, their waste can be responsible for 80% of the total metal recovery value. They can be made up of about 40% metals (such as Al, Fe, Ni, Cu, Zn, Sn, Ag, and Au), 30% polymeric materials, and 30% ceramics.
The recycling of waste PCBs involves existing techniques similar to conventional extractive metallurgy which is composed of different stages of extraction, purification, and recovery of metals from ores. These processes include pyrometallurgical, bio-hydrometallurgical, and hydrometallurgical. These processes can be performed separately or simultaneously, depending on the metals, the available technology, and the purity of interest.
Generally, two types of PCBs are used in small equipment and electronic appliances which are FR-2 and FR-4. The abbreviation FR means flame retardant. The major difference between these two types of PCBs is that FR-2 is composed of cellulose paper and coated with phenolic resin whereas FR-4 is composed of reinforced glass fibers coated with epoxy resin.
The WEEE also contains hazardous materials (such as Cd, Hg, Pb, and Cr). Thus, the improper disposal or treatment (including informal recycling of these materials) of these wastes can lead to environmental pollution and risks to human and animal lives.
Many studies have used magnetic separation in scrap PCB recycling. Iron is the most retained element in the magnetic fraction, followed by nickel, but lead and copper (non-ferrous metals) were also found in this fraction.
The slow material release during bulk extraction in the comminution process dragged the nonmagnetic particles along with it. Physical separation has been used to recover metals from scrap PCBs; however, it can cause metal losses of 10 to 35% owing to the insufficient release of metals in the fine fractions of plastics.
More on Recycling Industry Waste - Using Denim Waste to Produce a 3D Needled Composite
The hydrometallurgical process allows the recovery and purification of specific metals in multi-element solutions using techniques such as selective leaching, solvent extraction, electrowinning, the use of chelating resins, and precipitation.
Moreover, when compared to pyrometallurgy, hydrometallurgy has a more selective metal recovery ability with additional benefits of reduction in the emission of gases emitted into the environment and without any significant investments and operating costs.
The recycling of the scraps is initiated by the pretreatment stage which includes the dismantling of the parts containing possible metals. After that, physical separation and/or comminution can be performed using methods such as magnetic, electrostatic, pneumatic, and density separation. All these steps are performed chronologically to completely release the specific metals of interest from the PCBs.
The team pretreated, processed, and characterized the recovered metals from the scraped motherboards and memory boards. They performed three leaching steps: the first in a sulfuric acid medium for 18 hours; the second in an oxidizing acid medium for 6 hours at 95 °C and acid concentration of 2 M; and the third in 10 M nitric medium for 2 hours at room temperature.
They concluded that the primary leaching in a sulfuric medium is a suitable alternative to replace the magnetic separation for the iron extraction and subsequent hydrometallurgical processing of other metals.
Out of two acid leaching steps, one was able to extract iron, aluminum, and the highest percentage of tin, while the other acid leaching step in oxidizing medium extracted silver, copper, and the highest percentage of nickel and zinc.
Thus, a combination of these two methodologies can be used for the separation of iron from copper.
The hydrometallurgical study showed all the metals present in the memory board sample were solubilized, while on the motherboard only about 73 wt% of the metals were leached. However, after increasing the solid/liquid ratio of the motherboards, the leaching percentage of these samples increased to about 98 wt%, indicating that the metal extraction does not depend on the residue-acid ratio but the metal-acid ratio.
T. Auxiliadora, G. Martins, M. Caldas, V. Moraes, J. Tenório, D. Crocce, R. Espinosa, Recovering metals from motherboard and memory board waste through sulfuric leaching. Journal of Environmental Chemical Engineering, 106789. https://www.sciencedirect.com/science/article/pii/S2213343721017668?via%3Dihub
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Please use one of the following formats to cite this article in your essay, paper or report:
Cheriyedath, Susha. (2021, November 19). Using Acid Leaching to Recover Metals from Circuit Board Waste. AZoM. Retrieved on September 03, 2022 from https://www.azom.com/news.aspx?newsID=57400.
Cheriyedath, Susha. "Using Acid Leaching to Recover Metals from Circuit Board Waste". AZoM. 03 September 2022. <https://www.azom.com/news.aspx?newsID=57400>.
Cheriyedath, Susha. "Using Acid Leaching to Recover Metals from Circuit Board Waste". AZoM. https://www.azom.com/news.aspx?newsID=57400. (accessed September 03, 2022).
Cheriyedath, Susha. 2021. Using Acid Leaching to Recover Metals from Circuit Board Waste. AZoM, viewed 03 September 2022, https://www.azom.com/news.aspx?newsID=57400.
Do you have a review, update or anything you would like to add to this news story?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
The CVD Diamond from Element Six is a high purity synthetic diamond that is used for electronic thermal management.
Discover the CNR4 Net Radiometer, a powerful tool that can measure the energy balance between short-wave and long-wave Far Infrared radiation.
The Powder Rheology Accessory expands TA Instruments’ Discovery Hybrid Rheometer (DHR) capabilities to powders, enabling characterization of behaviors during storage, dispensing, processing, and end use.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022